2007 civic compustar 2w900fm as

Ok found some stuff.  Please let me know if this is right or if I need more.

Plug CN1

(Alarm) / Car color and location

1 (Red) / White on IGN..............Power

2 (GREEN / WHITE) / Red in Drivers Kick or Fuse box Rear 14 pin plug............. + Parking Light

3 (RED / White) / White on IGN...........Power

4 (White) / Orange IGN......... Accessory

5 (Violet) / ??????

6 (Yellow) / Yellow?........Starter

7 (Green) / Blue.....IGN

8 (Black) / Chassis.......Ground

Is that ok so far.  There are 2 ???? in there.

Oh and what do I do with the blue wire on the relay.  It says it is for a 2nd ign, starter or accessory.  So do I hook that to the Red on the Cars IGN?  Just to keep on on track to look back at confusion free.

(Alarm) / Car color and location

CN1 Relay (Blue) / Red IGN...... 2nd Accessory?

Moving on.  Stay with me and please correct..

Plug CN2

(Alarm) / Car color and location

1 (GREEN / WHITE) / gray or red (switch or MICU)........ - parking light out

2 (Black) / ???? ......... -status out

3 (Green) / DON'T NEED???? .......... 2nd IGN

4 (WHITE/ Black) to Purple Wire on CN1 Relay???? ........ 2nd ACC

5 (RED / Black) / DON'T NEED???? ........ 2nd Starter

your wire post is quite confusing...its a pretty straight forward install though. i can't post the exact wire guide since im not at my shop computer, although from the top of my head....

+12v    (White)

IGN   (Blue)

ACC   (Orange)

Starter  (Yellow)

^These wires can be either found at the ignition harness or the top of the fuse box^

Use negative parking lights (GREY) which can be found and the light switch. For door trigger you can use the domelight (PINK) negative trigger which is easily found in a 2 pin plug under the fuse box if you dont want to mess with diodes. Door locks was i THINK....lock(GREY) and unlock(GREEN) in a white plug deep in the driver kick.ARM(ORANGE) and DISARM(BROWN) is the same plug. the plug looks as if it going into the door. brake light is at the brake switch, i forget the colour, i think (WHITE/ GREEN). Trunk pin negative trigger(DK BLUE) in the 2nd 42pin plug from the top of the fuse box. Tachometer you can get from the injectors fairly easily.

Pretty good if you ask me coming from memory

As for your starter-kill, i dont use compustar enough to remember, but i know theres the wire guide written right on the brain, so it should tell you there.

good luck

Still going....

Plug CN3

(Alarm) / Car color and location

1 (Lt Blue) / Orange at Hand Brake...... Parking Brake

2 (Gray/Black) / Lt Blue at fuse box Mid 21 pin plug.......... -hood trigger

3 (Lt Blue/White) / Lt Green at brake switch or fuse box top 42 pin plug............. + foot brake

4 (Violet/Black) / Blue in Drivers Kick or fuse box top 42 pin plug........... -trunk trigger

5 (RED / White) / ???????????? ............ -door triggers

6 (Red) / NOT NEEDED......... + door triggers

7/8 (Brown) / NOT NEEDED.......... glow plugs

9 (Yellow/Black) / Ignition coil under hood........... tach

Thanks Dre.  This is only half clear to me reading it myself.  Sorry to confuse.

CN4

(Alarm Wire Color) / Car wire color and location.... .function

1 NOTHING

2 (Violet/White) / ?????? .......... SAYS (-) trunk release however cars diagram says it is a (+) release.... will it work?

3 Not going to use.... priority drivers door unlock

4 (Blue) / Dre says Gray, diagram says Blue in drivers kick.  Is this a (+) or a (-)?????????????

5 (Blue/Black) / Dre says Green, diagram says Yellow in drivers kick.  Is this a (+) or a (-)??????????????

6 NOTHING

CN5

(Alarm Wire Color) / Car wire color and location...... funciton

1 (Orange) / Orange in Drivers Kick .......... rearm (thanks dre)

2 (ORANGE / White) / Brown in Drivers Kick............ disarm (thanks dre)

3 (Violet) / Pink by fuse box...... dome light supervision

4 (Brown) SIREN

5 NOT USING.......... horn

6/7 NOT USING I THINK... AUX 1,2