viper 350hv problems

Home / the12volt's Install Bay / Car Security and Convenience / viper 350hv problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

will1688

Member - Posts: 2

Joined: December 06, 2007

Location: California, United States

Posted: December 06, 2007 at 11:35 PM / IP Logged

Okay, i got a 1994 honda accord and i tried to install a viper 350HV alarm into my car. I've got wiring diagrams and followed all the instructions ect.. the alarm is in, but it's not working all the way?.. the only thing it does is lock and unlock, and the only time i can trigger the alarm is if i open the door when it is armed.. if i try kicking the car or whatever nothing happens. ive tried playing with the sensitivity knob on the brain but no avail.

another problem is, that my valet button does not seem to be working, i get no response or chirps when i follow the instructions in the manual, and i can't even get it into valet mode.. when i arm the car it chirps once, pauses for 3 seconds, then chirps again.. i think that means something is wrong? not sure.. and when i arm the car, the blue LED blinks 5 fast times for a few times before it goes to blinking 1 time per second... i'm almost sure i have all the wires right, it locks and unlocks, the door triggers should be correct as well since when i open the door with it armed it triggers the alarm.. i`m not sure what else to do or how/what to check.. any input would be greatly appreciated.. thanks

Back to Top

mobile1

Silver - Posts: 479

Joined: February 23, 2004

Location: United States

Posted: December 07, 2007 at 12:17 AM / IP Logged

When you lock the car and it chirps....then it chirps again, means your door is open. If its not open it means you have the wrong door trigger wire. The LED blinking 5 times fast after you arm it means the door is open too. Check the wire you tapped into with a DMM and make sure its the right one.

Remember Wiring Diagrams are only a guide, not a blueprint. They can be wrong and can't show you "what green wire" they are talking about or whatever it may be. You need to test your wires before hooking them up.

Back to Top

will1688

Member - Posts: 2

Joined: December 06, 2007

Location: California, United States

Posted: December 07, 2007 at 12:21 AM / IP Logged

i see, thanks on that, does that also mean the shock sensor wouldn't work? how about my valet button..well i`ll see if i can fix those trigger wires and maybe everything will start working.. any more info would be greatly appreciated

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 350hv problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.