HVAC relocation?

Home / the12volt's Install Bay / Miscellaneous - Off Topic / HVAC relocation? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

eddyet

Member - Posts: 5

Joined: January 27, 2003

Location: United States

Posted: January 27, 2003 at 7:31 PM / IP Logged

hey all. i am building a custom panel in my 99 suburban to fit a few goodies in the dash and i have a quick question. when i pulled the HVAC controller out, there were several tubes (vaccume tubes i know) attached to the back. what i am wondering is is there anything special i must do to remove them (like depressurize the tubes somehow first) and reattach them? is there anything negative that could come of extending them (llke 2 feet)? thanks,

eddyet

themagicone

Silver - Posts: 325

Joined: October 01, 2002

Location: United States

Posted: January 28, 2003 at 12:10 PM / IP Logged

You can disconnect them no problem just make sure you remeber where they go. If you extend them i wouldn't see no problems but i'd try it before making it final.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

HVAC relocation?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.