push button start

Home / the12volt's Install Bay / Relays / push button start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

deziac

Member - Posts: 3

Joined: November 21, 2008

Location: Ontario, Canada

Posted: November 21, 2008 at 11:57 AM / IP Logged

Newbie trying to learn here, so please bare w/ me. I'm trying to install a push start button w/ ignition switch. I'm having troubles understanding and I need your help.(thanks) So I have the switch and push button, but the amperage is not enough so I will have to use a relay. I'm not sure how to apply this relay diagram:

http://www.instructables.com/id/SB5TWAJFBGW8EXP/

to wiring to this:

http://forums.bimmerforums.com/forum/showthread.php?t=617587&highlight=switch+panel

Please forgive my idocity, but if you guys can tell me how and what wires to hook up It would be much appreciated.(a visual diagram would be extremely helpful)

Thanks

deziac

Member - Posts: 3

Joined: November 21, 2008

Location: Ontario, Canada

Posted: November 22, 2008 at 6:49 PM / IP Logged

can anyone here help me w/ this?

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: November 23, 2008 at 6:43 AM / IP Logged

Are you planning to remove the Key Cylinder and steering lock? If not, why not just add a push to start button?

What is the amperage rating on the push button switch?

deziac

Member - Posts: 3

Joined: November 21, 2008

Location: Ontario, Canada

Posted: November 25, 2008 at 3:22 PM / IP Logged

i am an idiot wrote:

Are you planning to remove the Key Cylinder and steering lock? If not, why not just add a push to start button?

What is the amperage rating on the push button switch?

I am planning on keeping the key cylinder and lock, I just don't know how to add the switches to a relay, as the amperage is only 6a

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

push button start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.