hood switch 09 ford flex

Home / the12volt's Install Bay / Relays / hood switch 09 ford flex (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

infarction_35

Member - Posts: 7

Joined: December 13, 2009

Location: North Carolina, United States

Posted: January 01, 2010 at 11:52 PM / IP Logged

The DEI directwire sheet on my remote start shows "- N.C." which I am assuming means ground when the hood is closed and No contact/No current when the hood is open. Is there any way to use this circuit (which is accessible under the dashboard) and not have to run a separate wire through the firewall (which is almost impossible in this vehicle)?

thanks

travis

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 02, 2010 at 9:31 AM / IP Logged

Yes your assumption is correct, DEI make an adaptor but read your installation notes correctly, some DEI units make provision for this via the programming.

infarction_35

Member - Posts: 7

Joined: December 13, 2009

Location: North Carolina, United States

Posted: January 02, 2010 at 12:13 PM / IP Logged

howie,

can you give me the part number for the adapter? I have searched around and could not find it. I am installing a DEI Avital 4003 remote start only (no keyless entry, no security etc). The installation manual just shows the (-) hood switch connection and nothing in the programming for changing that to any other type of trigger.

thanks

travis

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 03, 2010 at 5:37 PM / IP Logged

DEI DTIMazda is the part you're looking for.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

hood switch 09 ford flex

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.