the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

electric fans with timer option


Post ReplyPost New Topic
< Prev Topic Next Topic >
1043 
Member - Posts: 9
Member spacespace
Joined: September 02, 2009
Location: Delaware, United States
Posted: August 31, 2010 at 9:15 AM / IP Logged  
I am getting ready t install a set of dual fans on my old pickup. I would like to add a switch that would shut the fans off when the truck is turned off or let the fans run for 2 or 3 minutes to cool off the engine compartment. So in other words, in the summer months I would have the switch set to allow the fans to run through a timer that would run the fans for two or three minutes, in the winter months I would have the switch set to turn the fans off with the ignition. I saw these relays on the Waytek site and thought they might work for something like this.
http://order.waytekwire.com/products2/M50/240/300/950/1/Timer%20Relays/Relays/Relays%20And%20Solenoids/
I have seen fan controllers that have this option but they seem a little pricey and the timer is not very adjustable.
My truck is a 1985 Dodge crew cab with a 360, I am working towards installing megasquirt fuel injection later this winter, there will be a lot of electronics under the hood and I'm concerned about the heat. As always your insight is appreciated...
oldspark 
Gold - Posts: 4,913
Gold spacespace
Joined: November 03, 2008
Location: Australia
Posted: August 31, 2010 at 8:14 PM / IP Logged  
Why not the timer relays in this site? Not that I am familiar with them, but I a not a fan (pun!) of solid state relays for this type of application.
And "hot electronics" for a cooling function? (But most timers are.)
Though if you use another relay for the fans (since the SSR only handles 15A), the SSR is ok.
The main issue is triggering the timer relay.
(FYI: I make my own circuits to control plain relays.)
And are you installing the megasquirt itself in the cabin? (I presume so, but it sounds like you may be putting it under the hood.)
1043 
Member - Posts: 9
Member spacespace
Joined: September 02, 2009
Location: Delaware, United States
Posted: September 01, 2010 at 8:49 AM / IP Logged  
I was thinking of just using the timer relay to trigger a 40 amp relay, I'll just use the slow speed on the fans. I have looked at numerous fan relay setups on this sight and I think I can modify one to suit my needs.
I'm going to convert the glovebox area to mount the megasquirt, the relay board for the MS will be mounted under the hood. During the summer months there is just a lot of heat under the hood, I think if the fans just ran for 2 or 3 minutes it would have to help.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer