dpco relay

Home / the12volt's Install Bay / Relays / dpco relay (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

randy howell

Member - Posts: 1

Joined: November 29, 2012

Location: Illinois, United States

Posted: November 29, 2012 at 8:50 PM / IP Logged

Hello,I have a dpco 12volt relay hooked up to a 2wire lock actuator that i need to stop the constant voltage. Needs to work just like power locks without the manual switching. The relay is triggered by a water sensor to change polarity .When the relay coil is not activated by this sensor the actuator is automaticaly reversed but has constant power both ways. Needs a timer of sort but I dont know what to use. Im limited to a very small space to add what is needed.Cap,transister,resistor? Thanks for helping me .

Randy70ta

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 30, 2012 at 6:57 AM / IP Logged

You're in the right direction.

Get yourself either a Spal or an MES locking timer.

DPCO with 3 second time out.

It's about 2" X 3". (50 cm X 75 cm).

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dpco relay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.