Qs on adding siren to horn output

Home / the12volt's Install Bay / Relays / Qs on adding siren to horn output (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

meanbean

Member - Posts: 3

Joined: October 12, 2003

Location: United States

Posted: October 15, 2003 at 2:12 PM / IP Logged

I am trying to add a siren to my factory/OEM alarm and note that there is only a pulse horn output available. When I have the siren connected to this output, the siren is coming on/off with the horn and is not continuous like a "normal" siren. I would like it so that the siren will remain continuous, so I can hear all of the tones cycle through, and the horn to continue to honk (on/off). If I connect a Constant to Momentary Output relay, as shown in the Relays: Special Applications, will this work for me? Thanks for the help.

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: October 15, 2003 at 5:49 PM / IP Logged

It wouldn't work for this application because once it would turn on what would turn it off? What brand of alarm is it, other then factory?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

meanbean

Member - Posts: 3

Joined: October 12, 2003

Location: United States

Posted: October 15, 2003 at 11:50 PM / IP Logged

Can't find any makers on the BCU to note brand but it is the OEM alarm found in a 1999 Nissan Maxima. Do you have any suggestions that might work for me to get this siren hooked up?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Qs on adding siren to horn output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.