Custom Relay box

Home / the12volt's Install Bay / Relays / Custom Relay box (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cc6969

Member - Posts: 7

Joined: June 01, 2004

Location: United States

Posted: June 03, 2004 at 4:25 PM / IP Logged

The BCM in my van has spots where the relays go in and can be pulled out if there bad. I am adding an alarm/starter to it and I will be needed to add like 5 relays to it to get it all working. Has anyone made a custome unit like ones the OEM's do for relays? How would someone begin to take on a project like this?

Thanks in advance

Ricky

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: June 03, 2004 at 4:55 PM / IP Logged

Are you talking about making a relay bank? If so, you can either buy the actual relay post rail, or simply use a simple piece of metal strip and affix the relays in place with screws.

The latter, metal strip will costs you $0.35 USD from Home Depot / Revy's.

Regards

EVIL Teken . . .

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Custom Relay box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.