need amp & relay help
Topic Closed)
Members
Search
Register
Login
Posted: July 25, 2004 at 10:51 AM / IP Logged
not sure if this is the right forum, but I'm using a relay so here it goes....
I originally had several accessories wired as shown in the diagram. My problem is that apparently the siren amplifier bleeds off voltage after the relay is switched off, so the strobe light and headlight flasher continue to be powered for a short duration, even after the switch is off.
Is there a way to prevent this from happening?
Thanks!
Posted: July 25, 2004 at 10:54 AM / IP Logged
Posted: August 12, 2004 at 8:39 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
