1995 police package crown victoria

Home / the12volt's Install Bay / Relays / 1995 police package crown victoria (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

arlhey

Member - Posts: 2

Joined: October 08, 2002

Location: United States

Posted: October 18, 2002 at 12:07 AM / IP Logged

Hi I have a crown victoria that I have had try to put the power locks on that car a thousand time and I always blow fuses or it dosen't work I had follow directions doing the reverse polarity door locks but still don't work I want to know if it's the relays or what the car dosen't have keyless entry I wan to know if all the relays are the same or is there is a specific relay for door locks.

I will appriciate if anyone will help me with this.

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: October 18, 2002 at 6:23 PM / IP Logged

well there are different relays but for alarms most use a spdt relay. i am not sure if the crown vic is like this but some fords use the passanger switch as the master good luck

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1995 police package crown victoria

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.