push button help

Home / the12volt's Install Bay / Relays / push button help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hondguy

Member - Posts: 1

Joined: December 30, 2004

Posted: December 31, 2004 at 5:17 PM / IP Logged

ok so i installed a push button or tried to at least. i have everything wired to the relay and switch

i got a couple of ?'s

is the push button i use always open?

the relay clicks but the car doesnt start on the button, but i can turn the key and start it. please help

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 31, 2004 at 11:34 PM / IP Logged

Im assuming its a push button starter?

It would normally be OPEN, push the button (ground on a relay hopefully) and the car starts!

Captanham

Silver - Posts: 365

Joined: December 18, 2004

Location: United States

Posted: January 02, 2005 at 11:28 AM / IP Logged

what pins on the relay do you have hooked up to what? also, looks like ur name is honda, so depending on the year of the car you might have a transponder, which means the car wont crank unless you have your factory key in the ignition, and if you just have one buton for the starter and no relays for ignition you prolly have to have the key forward too. (you probably already know all this, but i'm just saying it encase) tell me ur pin outs and i'll tell ya if i think i can help,

Bad Boys Customs

audio - video - security

If you use it. Suport it. Donate to the 12 volt!

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 10, 2005 at 9:39 PM / IP Logged

You have the starter motor side and the key side on the wrong pin on the relay.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

push button help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.