the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Relay for door lock/trunk pin


Post ReplyPost New Topic
< Prev Topic Next Topic >
Lubuspl 
Copper - Posts: 55
Copper spacespace
Joined: February 02, 2004
Location: United States
Posted: March 08, 2005 at 10:27 AM / IP Logged  

I need probably 2 relays for my door locking system to connect to my alarm. I came into a problem when there is one wire that gives off a pulse, one negative when open and one positive when close the door lock inside of my VW Jetta 98. I need someone to help me set up the relays because I am not fimilar with them. What kind of # fuse should I use for this?

The same problem I am facing with my trunk pin, the wire is constantly negative but when I push down the pin to open the trunk it lights up positive. How do I set up the relays for this and what fuse # should I use. 

Thank you soo much

boomer_106 
Silver - Posts: 710
Silver spacespace
Joined: November 25, 2003
Location: United States
Posted: March 14, 2005 at 11:55 AM / IP Logged  

This might help you. Take a look at the relay page in the links at left to help show you how to set up relays.

Volkswagen

Jetta

1997-1998

Remote Starter  Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Start:

 

RED / BLACK

IGNITION SWITCH HARNESS

Ignition  #1:

 

BLACK

IGNITION SWITCH HARNESS

Ignition #2:

 

Ignition  #3:

 

Accessory:

 

Brake  Light:

 

BLACK/ RED

AT SWITCH ABOVE BRAKE PEDAL

Tach  Signal:

 

Parking Lights:

 

GRAY/BLACK (DR) &

GRAY/RED (PS) (+) BEHIND DRIVER DASH

Headlights:

 

WHITE (+)

STEERING COLUMN HARNESS

Diesel  Glow Plug:

 

Clutch  Bypass Wire:

 

Notes:

 


Volkswagen

Jetta

1997-1998

Alarm and Keyless  Entry Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Constant  +12 Volts:

 

RED / WHITE

IGNITION SWITCH HARNESS

OEM Alarm Disarm:

 

Dome  Lights/Superv:

 

BROWN / WHITE (-)

IN DRIVER'S KICK PANEL

OEM Horn:

 

BROWN / BLUE (-)

STEERING COLUMN HARNESS

Power  Lock:

 

GREEN (+)

IN DRIVER'S KICK PANEL *

Power  Unlock:

 

GRAY (+)

IN DRIVER'S KICK PANEL *

Trunk  Release:

 

GRAY (+)

BEHIND DRIVER DASH

Alarm  Input Wire:

 

BROWN / WHITE (-)

IN DRIVER'S KICK PANEL

Notes:

* See Installation Note # 202 - Positive Pulse Door Lock Diagram.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer