Remote activation of relay

Home / the12volt's Install Bay / Relays / Remote activation of relay (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Declan

Member - Posts: 1

Joined: April 10, 2005

Posted: April 10, 2005 at 7:11 AM / IP Logged

I require the remote activation of a relay which in turn will activate a 12 v pull solenoid. I am using the control for a model airplane to send the signal to a receiver. The receiver will output a 4.8 V signal which I want to activate the relay. Can anyone advise me on what type of relay (circuit) which I can use where I will combine the 4.8v output and the 12 v from a normal battery on the same circuit?

Back to Top

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: April 17, 2005 at 6:22 PM / IP Logged

Remote activation of relay -- posted image.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

Back to Top

Search for other posts by hotwaterwizard

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote activation of relay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.