the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Relay Data


Post ReplyPost New Topic
< Prev Topic Next Topic >
cbenpora 
Member - Posts: 5
Member spacespace
Joined: October 17, 2003
Location: Australia
Posted: May 05, 2005 at 10:28 PM / IP Logged  
Can anybody point me to a source of information on specifications for relays.
Relays are easy enough to come by from scrap yards and I would like to know how or where I can find out the current rating and whether not they are suitable for continuous or intermittent operation.
Nissan relays usually are color coded.
I would like this info because I wish to make up a seperate relay and fuse panel in an RV to operate of an auxilliary battery circuit and also to supply power to a Caravan (known as Camper Trailer in U.S.)
Cheers,
Colin (West Australia)
Colin Benporath
Perth,
West Australia
Mad Scientists 
Silver - Posts: 380
Silver spacespace
Joined: February 07, 2004
Location: United States
Posted: May 06, 2005 at 8:54 AM / IP Logged  

Oftentimes you can search on the manufacturer's name on the relay.. if it has it on there. You could look at the fusing for the circuit the relay is powering to get an idea of current rating and what the circuit is for to determine continuous or intermittent.

While I understand why you want to use scrap yard parts, at least look into cost of new relays.. if nothing else, you know that they are brand new vs. of unknown condition.

I also have an RV; if you have any other questions about anything, just ask.

Jim

cbenpora 
Member - Posts: 5
Member spacespace
Joined: October 17, 2003
Location: Australia
Posted: May 06, 2005 at 9:33 PM / IP Logged  
Thanks Jim,
Most relays are made by "Nippondenso" but carry the vehicle part No, eg Nissan or Toyota etc and a search doesnt reveal anything.
Relays here are about $15 to $20 each and because the engine bay "Boxes" are only junk, it is easy to get them free. This also means getting relay sockets, fuse connectors etc which normally are hard to source.
Having worked in electronics for years, experience shows that generally relays don't create too many problems with age unless they are operating at their limits and burning contacts. My major concern is regarding the relay specs on Intermittent use against constant use such as Horn relay versus Fuel pump or driving light relay.
Colin
Colin Benporath
Perth,
West Australia

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer