Simple diagram for Power Windows

Home / the12volt's Install Bay / Relays / Simple diagram for Power Windows (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

timkins

Member - Posts: 37

Joined: July 21, 2004

Location: United States

Posted: February 03, 2006 at 2:55 PM / IP Logged

I am in the process of moving the power window switches from the door to a center console. These are 5 wire switches from GM and I want to use something else. Either toggle switches or (?) some other suggestion. Any help would be appreciated along with any diagrams that are required. Thanks

Back to Top

infinkc

Copper - Posts: 438

Joined: October 28, 2002

Location: United States

Posted: February 03, 2006 at 7:07 PM / IP Logged

easiest way i can think of integrating a better type of switch is get an aftermarket window module, once hooked up to the window motor wires you can control the windows up and down by just pulsing the trigger wire with a negative trigger. you can use any type of switch in this case that is momentary

There are 10 types of people in the world, ones that understand binary and ones that dont.

Back to Top

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: February 05, 2006 at 12:18 AM / IP Logged

Simple diagram for Power Windows -- posted image.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

Back to Top

Search for other posts by hotwaterwizard

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Simple diagram for Power Windows

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.