+ Pulse switched circuit

Home / the12volt's Install Bay / Relays / + Pulse switched circuit (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ltglenn13

Member - Posts: 1

Joined: February 21, 2006

Location: United States

Posted: February 21, 2006 at 7:36 AM / IP Logged

I need some help with a positive pulse switched circuit in a 12volt system. I have a strobe power supply that when switched on should be always powered. when a "dimmer" circuit is activated, I need the same circuit to switch off until the circuit is shut off then back on to restore it to normal operation. The dimmer circuit is activated with a momentary positive pulse. Any help will be greatly appriciated.

Glenn S

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: March 01, 2006 at 12:11 AM / IP Logged

+ Pulse switched circuit -- posted image.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

Search for other posts by hotwaterwizard

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

+ Pulse switched circuit

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.