DEI 528T pulse timer Wiring

Home / the12volt's Install Bay / Relays / DEI 528T pulse timer Wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bbtaco

Copper - Posts: 119

Joined: November 03, 2002

Location: Virginia, United States

Posted: July 11, 2006 at 4:04 PM / IP Logged

Is this the correct way to wire up a 528T to get a timed (-) output pulse from a .5 second alarm (-) input pulse?

Red fused 12VDC constant

Black chassis ground

BLACK/ stripe (-) input pulse from alarm

Brown(87) (-) timed output to device

Yellow(30) Chassis ground

Orange(87a) not used

Back to Top

josh1979

Silver - Posts: 320

Joined: July 03, 2006

Location: United States

Posted: July 11, 2006 at 9:51 PM / IP Logged

yes as long as blue loop is uncut

bring back the rotary phone so i dont have to press 1 to proceed in english

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI 528T pulse timer Wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.