dome light relay

Home / the12volt's Install Bay / Relays / dome light relay (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rustie.crust

Member - Posts: 5

Joined: April 27, 2007

Location: United Kingdom

Posted: May 08, 2007 at 5:38 PM / IP Logged

hi guys could someone please tell me is it possible to modify the relay diagram below to bypass the dome light delay on a 51 plate fiat punto as it keep triggering my alarm thanks in advance rich

Here is the same drawing modified with the Relay contacts drawn in so you can see what is going on.

dome light relay -- posted image.

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: May 18, 2007 at 8:38 AM / IP Logged

More explaining is needed I don't understand what you are trying to do.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: May 18, 2007 at 8:52 AM / IP Logged

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

rustie.crust

Member - Posts: 5

Joined: April 27, 2007

Location: United Kingdom

Posted: May 18, 2007 at 11:24 AM / IP Logged

my dome light stays on for about 15 seconds when i lock the doors so the alarm thinks the doors are open and triggers the alarm

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: May 18, 2007 at 2:54 PM / IP Logged

I would Just add another pin swith for the alarm instead of using the one for the dome light.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

rustie.crust

Member - Posts: 5

Joined: April 27, 2007

Location: United Kingdom

Posted: May 18, 2007 at 4:37 PM / IP Logged

thanks do you mean add a pin switch to every door to trigger the alarm thanks for advice rich

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: May 18, 2007 at 8:38 PM / IP Logged

Yes, Then you don't have to mess with that stupid Light Supervision Circuit board.

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

nizmotec

Member - Posts: 1

Joined: March 29, 2004

Location: Jamaica

Posted: May 22, 2007 at 10:25 AM / IP Logged

what kind of alarm is it?

if it has dome light delay feature,enable it,this will cause it to ignore the dome light being on while arming.

the Real Xtreme,accept no Fakes!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dome light relay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.