Set up for memonetary switch.

Will this work? I tried and can't get it to, are the directions correct. And what kind of rating does the diode need? Thanks.

hi,

use 3 30 amp relays (5 pin type)wire a latching relay using one like this:30 ground place a diode between 85 and 87 with band facing 87pin 87a goes to pin 86 of second relaypin 85 goes to 87 of second relaypin 85 of second relay uses 12 volts from pushbuttonpin 30 of second relay goes to ground.make a 3rd relay like this:pin 30 12voltspin 87 to pin 86 of first relay(latching relay)pin 85 comes from pushbutton alsopin 86 comes from pin 87 from first relay(latching relay ouput)this will allow u to pouch the button once and it latches relay to throw a ground out(you can use another relay to change to poaitive if u need) then when u hit button again it will close and disconect from latching relay!!!