the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 range rover, remote start wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2004 range rover, remote start wiring (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
northern 
Copper - Posts: 154
Copper spacespace
Joined: November 04, 2005
Location: United States
Posted: January 22, 2008 at 4:13 PM / IP Logged  
2004 Land Rover Range rover wiring information request please.
looking at doing a remote start, I have a few extra keys so I don't mind using a key wrap or universal bypass kit.
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 24, 2008 at 10:04 AM / IP Logged  
PASSIVE ANTI-THEFT YES TRANSPONDER   SEE NOTES 
 12 VOLTS Red Ignition switch harness   + 
 You must remove portions of the center console to access the ignition switch.
 IGNITION Green (large gauge) Ignition switch harness   + 
 You must remove portions of the center console to access the ignition switch.
 IGNITION 2 Green (small gauge) Ignition switch harness   + 
 You must remove portions of the center console to access the ignition switch.
 ACCESSORY Violet/black Ignition switch harness   + 
 This wire is actually a third ignition and must be connected as such or the vehicle will not start. You must remove portions of the center console to access the ignition switch.
 STARTER BLACK / YELLOW Ignition switch harness   + 
 You must remove portions of the center console to access the ignition switch.
 TACH SIGNAL White At 1st coil on driver's side of engine   AC 
 Under the engine's plastic cover.
 LOCK Blue/red At module in driver's door   - 
 UNLOCK WHITE/ black (double pulse) At module in driver's door   - 
 DOORPIN BROWN / white Found at module in each door   - 
 HOODPIN Violet/green At pinswitch under hood on driver's side   - 
 TRUNK RELEASE BROWN / gray At release switch in dash   - 
 FACTORY ARM Arms with lock wire     
 FACTORY DISARM Disarms with unlock wire     
 BRAKESWITCH BROWN / gray At switch above brake pedal   + 
 You must test with ignition ON.
 PARKLIGHTS Black SEE NOTES    
 Use a relay to open this wire at the light switch. This will turn the lights on. See the appropriate TECH TIP diagram.
 HORN BROWN / red At steering column   - 
Available Notes
Vehicle Notes 
PLEASE NOTE: This vehicle is equipped with a TRANSPONDER passive anti-theft system. Please refer to the appropriate security diagram before any remote starter installation. IMPORTANT NOTE FOR REMOTE START INSTALLATIONS: Once the vehicle has been started by remote, the ignition switch locks out and the key cannot be inserted. You must apply the brake to shut the vehicle down before the key will go in.
Additional Notes 
For remote start key sense must be energized using an accessory output. The trigger must drop out during crank to allow the key to turn in the ignition once the vehicle is remote started.
northern 
Copper - Posts: 154
Copper spacespace
Joined: November 04, 2005
Location: United States
Posted: January 24, 2008 at 5:34 PM / IP Logged  
What source did you use for this wiring? Thanks Kartune's!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, April 30, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer