91 opel vecta a

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 91 opel vecta a (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

drewbu

Member - Posts: 9

Joined: August 28, 2002

Posted: April 21, 2008 at 10:17 AM / IP Logged

Hi i need wiring info on 1991 Opel Vectra A to install remote starter and alarm thanks

kola7126

Copper - Posts: 93

Joined: September 13, 2007

Location: Russian Federation

Posted: April 24, 2008 at 4:04 PM / IP Logged

POWER SUPPLY + 30: connect to the 3 mm 2 RED wire of the wiring harness coming out of the black connector behind the fuse box.

- 31: connect to the 4 mm2 BLACK wire located in the wiringharness coming out of the general power supply behind the left lateral bulkhead, drivers side.

IGNITION WIRE + 15/54: connect to the 1 mm 2 BLACK wire in the wiring harness along the sill cover, drivers side.

DIRECTION INDICATORS Connect to the 1 mm 2 GREEN / WHITE wires located in the wiring harness of the sill cover, passengers side.

ELECTRIC WINDOWS Comfort closing Negative control signal

Connect to the 0,5 mm 2 BROWN / BLACK wire in the wiring harness of the central door locking connector located behind the left lateral bulkhead, passengers side.

CENTRAL DOORS LOCKING Negative control signal

Connect to the 1 mm 2 BROWN / RED wire (lock) and BROWN / WHITE wire (unlock) located in the wiring harness coming out of the central connector of the

central door locking unit located behind the right bulkhead, passengers side.

IMMOBILISATION POINT Fuel pump

Connect to the 2 mm 2 RED / BLUE wire located in the wiring harness of the sill cover, drivers side.

BONNET SWITCH Install an additional switch on the lateral member, drivers side.

DOORS SWITCH Connect to the 1 mm 2 GREY wire located in the wiring harness and coming out of the connector of the central door locking unit, passengers side.

BOOT SWITCH Connect to the BROWN / WHITE wire located in the same connector of the doors wire.

drewbu

Member - Posts: 9

Joined: August 28, 2002

Posted: April 25, 2008 at 12:58 PM / IP Logged

thanks kola7126 or should i say "spasibo"

snoopyrider

Member - Posts: 2

Joined: May 09, 2008

Location: Netherlands

Posted: May 09, 2008 at 3:18 PM / IP Logged

hi.

is calibra v6 from 1997 the same?i want to remote my central door system, but dont know which wire need + and wich needs - pulse to lock/unlock.would like the windows going up.thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

91 opel vecta a

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.