the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

speed sensor wire '05 infiniti g35?


Post ReplyPost New Topic
< Prev Topic Next Topic >
eod g35 
Member - Posts: 3
Member spacespace
Joined: March 04, 2009
Location: Virginia, United States
Posted: March 04, 2009 at 2:39 PM / IP Logged  

I'm doing a turbo timer install on my 2005 Infiniti G35 Coupe.  I've found most of the information I need, but what I can't find is the pin out, wire description for the speed sensor wire.  RPM signal wire comes out of pin 62, but I can't find the speed sensor signal wire.  From everything I've found, wiring diagrams will be the same for all 2003-2005 Infiniti G35 Sedan/Coupe and the Nissan 350Z. 

Brian 

KPierson 
Platinum - Posts: 3,527
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: March 04, 2009 at 3:10 PM / IP Logged  
You can find it in a lot of places, the easiest is the AC display in the middle of the dash.  I believe it's a WHITE/ green wire there.  It is also at the radio and at the sunroof controller (not sure why).  
Kevin Pierson
eod g35 
Member - Posts: 3
Member spacespace
Joined: March 04, 2009
Location: Virginia, United States
Posted: March 05, 2009 at 1:06 PM / IP Logged  
Is that running to the Unified Meter Control Unit in the dash?  Or is it the actual speed sensor wire.  Everything I've looked at runs power to the Uified Meter Control, and shows the tach and speedo as attached in parrallel, but nothing on the actual speed sensor wire.
KPierson 
Platinum - Posts: 3,527
Platinum spaceThis member consistently provides reliable informationspace
Joined: April 14, 2005
Location: Ohio, United States
Posted: March 05, 2009 at 2:34 PM / IP Logged  

The actual speed sense wire is at the combination meter (cluster) pin 14.  It is a WHITE/ green.

It's also pin 17 (WHITE/ green again) at the Display and A/C Auto Amp.  The cluster is a pain to take out, the Display and A/C Auto Amp is simple to take out.

It's on page 47 of the ATC.pdf file in service manual marked as Speed Sene

Kevin Pierson
eod g35 
Member - Posts: 3
Member spacespace
Joined: March 04, 2009
Location: Virginia, United States
Posted: March 15, 2009 at 10:08 AM / IP Logged  
Sorry about the delay.  Trying to get the rest of my build done too.  Thanks for the info.  It's been a big help.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer