alarm starter 98 subaru problem

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / alarm starter 98 subaru problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jessewag

Member - Posts: 4

Joined: October 25, 2009

Location: Montana, United States

Posted: December 28, 2009 at 8:28 AM / IP Logged

Having a problem getting the start feature working? I get ignition but, no start at all? I am sure I hooked up right wires here? But, not sure if the blue wire from remote where it goes?

Book diagram says blue wire hooks up to accessories. However the vehicle diagram you guys provided says nothing about a accessories hookup. You guys show a Ignition #2 wire in vehicle wiring listing to hook up a RED / yellow wire. But where? Same thing with the wires for the alarm disarm feature too. In the book no listing for the OEM alarm wires where they hook in on the remote wiring?

Jesse Wagner

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 28, 2009 at 9:39 AM / IP Logged

The accessories would include immbiliser by-pass if your vehicle has a factory transponder. What make and model R/S please. What model Subie? Does it crank over at all? Also try inserting the ignition key then see if it then starts.

You're not giving us enough info to help.

You hooked up wires right? How do we know? What have you connected to where? Have you tested? Have you programmed tach?

jessewag

Member - Posts: 4

Joined: October 25, 2009

Location: Montana, United States

Posted: December 28, 2009 at 1:26 PM / IP Logged

Well I am not sure if it has a transponder? I do know it has a after market alarm hooked into the system.

In answer to your question about vehicle. Its a 98 Subaru outback. No it don't crank at all. I get a ignition on but no start or crank.

The problem I am having is not clear information where what wire goes where? For instance the blue wire from the remote? Where does it go? Then all of the door lock wiring, and the alarm wiring where do they go? There is no specific where these wires go? Your wiring (for the subaru wiring) listing show that a wire hooks up to a RED / yellow wire. But, does not say which wire from the remote goes there?

To further confuse the hell out of me, there is a note on the bottom that says Ignition 2 must be programmed to not be "Hot" during crank or a "check engine" light will appear in the instrument cluster.

Not sure what else to give you here?

Jesse A. Wagner

Jesse Wagner

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 28, 2009 at 2:34 PM / IP Logged

Test to see if your starter output from the R/S is working, from your answers I would only have to suggest you take it to a pro and let them install/rectify it. It's an extremely simple car to do.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm starter 98 subaru problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.