vss lincoln navigator location

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / vss lincoln navigator location (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

royalet

Member - Posts: 18

Joined: June 19, 2006

Location: United States

Posted: May 18, 2010 at 11:04 AM / IP Logged

hey guys, need some help, I am looking for the speed sensor for a 99 lincoln navigator. I an avic that i am throwing in the truck, that i have wired and everything, i just cant find where to connect the sensor wire at. Thanks

topinstaller200

Copper - Posts: 164

Joined: June 02, 2010

Location: Florida, United States

Posted: June 08, 2010 at 1:44 PM / IP Logged

Gray/Black wire in factory radio harness pin9 or pin 68 at ecm on right side of engine

Search for other posts by topinstaller200

cobraguy

Member - Posts: 26

Joined: July 20, 2009

Location: Arizona, United States

Posted: July 22, 2010 at 12:04 PM / IP Logged

You should also find it on your speed sensitive wiper module, or if you have any type of trip computer, it should be there as well. All will be gray with black stripe. In 99, Ford put the VSS in a lot of places...but the radio is the easiest to get to.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vss lincoln navigator location

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.