1999 wrx alarm wiring?

am after all the wiring diagrams and wire colour codes to help me with installing a car alarm? any help will be greatly appreciated. the car is a 1999 subaru WRX limited edition RA if that helps anything Cheers

Test, it's not too complicated, info is probably on this site under vehicle wiring. The year is borderline and you will probably need an actuator in the driver's door for the central locking, test by seeing if you can lock all the doors from the passenger door,by inserting key in the lock. Driver's door panel will give you all the door feeds, back to boot (trunk) for trunk contact at the switch in door catch, bonnet (hood) pin switch required. If you need an actuator, I can email photos of it's installation. If so, PM me with your email address.

One exception was if it had keyless entry ex factory, motor wires (aka 5 wire) in the driver's kick well.