2003 mitsubishi diamante vr x

I have a 2003 Mitsubishi Diamante VR-X that was broken into and had the wires cut. I am trying to find a wiring diagram / chart to show what the wires are for the radio (it is a amped system, so there are only 5 or 6 wires in the dash) and the environmental controls (for the ac/heater unit). Any help would be appreciated.

diagrams for climate control: environmental control diagrams diagrams for audio system: radio diagramsThis information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

Thank you soooooooo much. This is exactly what I needed. I haven't been able to find this anywhere else. You are a life saver!

For the environmental controls, do you know what the voltage should be that is going to the air mix motor and the mode motor? Thanks in advance!

pin #21 (mode selector motor) in face position = 10V "    "   "     "       "     in defrost position = about 0.5V pin #22 (air mix damper motor) in max hot position = about 0.5V "    "   "   "    "     "     in max cool position = 10V pin #24 (air mix damper motor) in max cool position = 10V "    "   "   "    "     "      in max hot position = about 0.5V pin #25 (mode selector motor) in defrost position = 10V "   "    "      "       "    in face position = about 0.5VThis information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.