791 bypass module

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 791 bypass module (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

thuhamilton

Member - Posts: 4

Joined: July 20, 2010

Location: Ontario, Canada

Posted: November 02, 2010 at 7:11 PM / IP Logged

I am install a aftermarket remote starter on My 2000 Honda Prelude, and my question is

Do I need a 791 bypass module as "Bulldog" wiring diagram ,and if I do ,how can I install that .Thank you for your help

thuhamilton

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: November 02, 2010 at 7:50 PM / IP Logged

You could get a Fortin Key-Override-All. I have used then on my cars with good results and they have pretty good instructions. www.ifar.ca is the website. What type of remote start are you installing?

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

kreg357

Platinum - Posts: 7,787

This member has been recognized as an authority in Electrical Theory. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 03, 2010 at 6:52 AM / IP Logged

The Bulldog 791 requires a spare key to be placed inside the unit & hidden under the dash. There are only 3 wires to connect. The Red wire goes to +12v constant. The Orange wire goes to chassis ground. The Blue wire goes to the remote starter (-) Status Out or GWR wire.

The better choice is smokeman1's suggestion. Better security and no lost key. The DEI PKALL is the same as the Fortin KEY-OVERRIDE-ALL but easier to find and usually less expensive.

Soldering is fun!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

791 bypass module

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.