ford fiesta 1.6 zetec wiring info

Greetings:

Please help me, i try to install a alarm with starter in a ford fiesta 2003 1.6 made in brasil, i can't find info about these car. ( I searched many times in google but no luck).

I locate only some wires, but my alarm need a RPM wire signal and i can't find them.

Please tell me these info or a link for them.

Aditionally need how to hack the centralized close module for open/close doors with  the alarm.

Lock = BLACK/ orange neg. Unlock = BLACK/ green neg. Both at the GEM box. Use the BLACK/ blue dome light trigger, it also covers the hatch. RPM, go to injectors 2 wires to each injector, one wire will be the same colour to all injectors, the second will be different for each, use one of the different coloured wires, use a DMM set to 20VAC, red probe to wire, black to ground with engine running, should read 3-6VAC. I can send you the wiring sheet but it's for the UK version. If you still need it PM me with your email address.

thanks,

for the rpm's i known a cable with the signal that drives the tachometer on the instrument panel. I found a message that said it is the BLACK/ white in harness that connects to the instrument panel, mentioned that there were two but i don't  known how reading with a tester.

please forgive my bad english.

Look at my last post about tach testing, you will need a DMM = Digital Multi Meter. It can be done with an LED sensor but not at the instrument panel.

I think BLACK/ white is a CAN Hi or Lo, don't touch, instead, look at either BLACK/ green or BLACK/ orange at the coil.