10 honda accord

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 10 honda accord (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

4trxrd

Member - Posts: 5

Joined: May 20, 2011

Location: Washington, United States

Posted: March 30, 2012 at 12:29 AM / IP Logged

I just installed a remote start in a 2010 honda accord using a avital 4103 and a idata bypass it all worked good but I can"t lock and unlock the doors when the cars running I ran the door lock though the bypass module? any help would be great thanks

flobee4

Silver - Posts: 585

Joined: January 02, 2004

Location: United States

Posted: March 30, 2012 at 8:54 AM / IP Logged

on the idatalink make sure the BLACK/ white wire marked as starter and the Pink wire marked as ignition. they need to be tapped into the starter and ignition wire respectively. you can tap in at the car's ignition harness or the remote starters ignition harness.

Also just to make sure you are aware, the Honda's remote will never operate locks while running, you have to use the 4103 remote to unlock the door.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

10 honda accord

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.