2008 Lexus IS250 Remote Start

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2008 Lexus IS250 Remote Start

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

myrdhyn

Member - Posts: 1

Joined: October 25, 2018

Location: Massachusetts, United States

Posted: October 25, 2018 at 3:48 PM / IP Logged

I am planning out a remote start install using a CM7200S. It has connections for either a high current or low current ignition harness. Anyone done one of these installs before and know which I should use? Also, if done before, tips?

I found this thread: https://www.the12volt.com/installbay/forum_posts.asp?tid=103587 for the wiring info I need, but it does not have any info about if it is high or low current.

Edit: Looks I just answered my own question when reviewing the manual for the Blade TB I will be using as well. The wiring diagram shows us getting power from the brake pedal and using a 12v relay and a 1N4001 diode.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.