2013 Dodge Challenger R/T Wiring Diagram

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2013 Dodge Challenger R/T Wiring Diagram

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cabron19

Member - Posts: 15

Joined: December 05, 2009

Location: California, United States

Posted: June 22, 2019 at 2:31 AM / IP Logged

The subject says it all. Any help would be greatly appreciated.

Mostly needing info related to security system wiring. Thanks in advance.

Back to Top

cabron19

Member - Posts: 15

Joined: December 05, 2009

Location: California, United States

Posted: June 22, 2019 at 2:33 AM / IP Logged

The car is a "push button start".

Back to Top

wirewise

Moderator - Posts: 489

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 07, 2002

Location: California, United States

Posted: June 22, 2019 at 5:32 AM / IP Logged

CHALLENGER 2010-2014

KEY T-HARNESS IMMOBILIZER

N/A N/A CHRYSLER'S MULTIPLEX IGNITION/ANTI-THEFT SYSTEM, SEE NOTE #1

PART COLOR LOCATION DIAGRAM

12 VOLT CONSTANT RED (+) @ BATTERY or TIPM, Note #2

STARTER CONNECTION MADE AT INTERFACE BYPASS MODULE

STARTER 2 N/A

IGNITION 1 PINK/WHITE (+) @ IGNITION SWITCH (BLACK,12 PIN PLUG) PIN 3

IGNITION 2 N/A

IGNITION 3 N/A

ACCESSORY/HEATER BLOWER 1 N/A

ACCESSORY/HEATER BLOWER 2 N/A

KEYSENSE N/A

PARKING LIGHTS ( - ) N/A

PARKING LIGHTS ( + ) WHITE/PURPLE (+) in PASSENGER KICK PANEL, Harness to Rear of Vehicle.

POWER LOCK PURPLE/DK.GREEN (-) ONE WIRE SYSTEM (-) THRU 330 OHM DRIVERS KICK (in door harness)or GRAY 26 PIN PLUG, PIN 5 at instrument cluster

POWER UNLOCK Use LOCK wire, (-) thru a 100 Ohm Resistor (-) THRU 100 OHM SAME WIRE AS LOCK

LOCK MOTOR WIRE LT. GREEN (5 WIRE) DRIVERS KICK PANEL(door harness) or GRAY 26 PIN PLUG, PIN 12 at INSTRUMENT CLUSTER

DOOR TRIGGER PURPLE (-) in DRIVERS KICK PANEL or INSTRUMENT CLUSTER, WHITE 26 PIN PLUG PIN 3

DOMELIGHT SUPERVISION YELLOW/WHITE (+) @ PASSENGER A PILLAR or INSTRUMENT CLUSTER, WHITE 26 PIN PLUG, PIN 8

TRUNK RELEASE PURPLE/TAN (-) @ RELEASE SWITCH or INSTRUMENT CLUSTER, (GRAY 26 PIN PLUG) PIN 22

SLIDING POWER DOOR N/A

HORN N/A

TACH NOT BROWN/WHITE(V6) OR BROWN (V8) (AC) @ Any FUEL INJECTOR

WAIT TO START LIGHT

BRAKE DK. GREEN/WHITE (+) @ BRAKE SWITCH or BLACK 12 PIN PLUG, PIN 12, @Wireless Ign. Node on Ign. Switch

FACTORY ALARM DISARM SENTRY KEY AND IGNITION

ANTI-THEFT CHRYSLER'S MULITPLEX IGNITION/ANTI-THEFT SYSTEM

NOTES

NOTE #1 REMOTE START REQUIRES INTERFACE/ ANTI -THEFT MODULE PART # DBALL2 .

NOTE #2 TIPM IS LOCATED ON PASSENGER SIDE FENDER UNDER HOOD

~wirewise~ Verify all wiring with your meter before making any connections!

Back to Top

cabron19

Member - Posts: 15

Joined: December 05, 2009

Location: California, United States

Posted: June 23, 2019 at 1:42 AM / IP Logged

Thank you wirewise!!!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.