Bypassing Factory Alarm??

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Bypassing Factory Alarm?? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

xinfiniter

Member - Posts: 5

Joined: July 27, 2002

Posted: July 29, 2002 at 9:41 AM / IP Logged

Ive installed an AutoPage alarm...everything goes well except it wont start. The wiring diagram says that the factory disarm is the Pink Yellow/Black wire.....but where is it?? There are lots of pink and yellow black wires to different things. The car cranks but just wont start. I know that I have the Passlock II system and the car wont start with the key in the ignition either. Any info would be great....Thanks

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: July 29, 2002 at 10:01 AM / IP Logged

what year of car and make and also did you try to remote start with the factory alarm disarmed manually??????

Search for other posts by mobiletoys2002

xinfiniter

Member - Posts: 5

Joined: July 27, 2002

Posted: July 29, 2002 at 1:10 PM / IP Logged

the year is a 2002 sc2.....disarmed manually?? what do you mean

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Bypassing Factory Alarm??

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.