the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Need wiring dia. for 89 Honda Accord DX


Post ReplyPost New Topic
< Prev Topic Next Topic >
mrralph 
Member - Posts: 2
Member spacespace
Joined: June 04, 2004
Location: United States
Posted: June 04, 2004 at 11:18 AM / IP Logged  
Does somebody have that available or could find it pleae email me mrralph@tmo.blackberry.net
jfk51502003 
Copper - Posts: 221
Copper spacespace
Joined: March 04, 2004
Location: United States
Posted: June 05, 2004 at 11:52 AM / IP Logged  
DIRECTWIRE™ WIRING INFORMATION - HONDA / ACCORD / 1989 / Remote Start
[PRINT THIS PAGE]
12voltswhite, WHITE/ black + ign. harness, fusebox
StarterBLACK/ white + ign. harness, fusebox
Second Starter
IgnitionBLACK / YELLOW + ign. harness, fusebox
Second Ignition
Third Ignition
Accessoryyellow and blu/wht + ign. harness, fusebox
Second Accessory
Keysense
Power LockGREEN / WHITE - DKP or mod. under pass seat
Power UnlockGREEN/ red - DKP or mod. under pass seat
Lock Motor
Unlock Motor
Parking Lights+RED / black fuse box in dr. kick
Parking Lights-
Hazards
Turn Signal(L)
Turn Signal(R)
Reverse Light
Door TriggerBLACK/ white - above fusebox
Notes: In a two-wire harness wrapped in vinyl tubing above fusebox behind coinbox. Also found the same color in a green plug to the right of the steering column.
Dome Supervision
Trunk/Hatch PinGREEN/ black - under left side dash
Hood Pin
Trunk/Hatch Release
Power Sliding Door
Factory Alarm Arm
Factory Alarm Disarm
Disarm No Unlock
Tachometerblue AC 2 pin plug from distr.
Wait to start
Brake WireGREEN / WHITE/ slvr dot + at brake sw.
Parking Brake
Horn Triggerblue/red - at steering column
Notes: High-current ground. Use a relay when interfacing with this circuit.
Memory Seat 1
Memory Seat 2
Memory Seat 3
Immobilizer Bypass Module:Required: NoType: N/APart #: N/A
Notes: N/A
Need wiring dia. for 89 Honda Accord DX -- posted image.
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer