2.4L Jeep Wrangler 2003

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2.4L Jeep Wrangler 2003 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

peanut36274

Member - Posts: 4

Joined: September 23, 2004

Location: United States

Posted: September 29, 2004 at 11:18 PM / IP Logged

I have the 2.4L Jeep Wrangler 2003, and I hooked my tach to the gray/white wire from the instrument cluster. Not sure if it is right, because I couldn't find the coils. Any help??????? also i have the viper 791xv and i the remote start will crank the jeep but immediately goes dead. Need help if you can, also it will cran and run fine if the key is on??

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 29, 2004 at 11:54 PM / IP Logged

Did you bypass the transponder key ? This Jeep has a transponder based anti theft system built into the ignition system.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2.4L Jeep Wrangler 2003

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.