the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1999 Volkswagen Getta GLS.


Post ReplyPost New Topic
< Prev Topic Next Topic >
dunyamunya 
Member - Posts: 10
Member spacespace
Joined: October 25, 2004
Location: United States
Posted: October 29, 2004 at 2:07 PM / IP Logged  
I have a 1999 Volkswagen Getta GLS and I am planning to install Remote Start and Alarm. Can someone give me the wiring diagram for the car with the colors, locations and +/-? Also, does this car have an immobilizer? If so, which bypass module would you advice on buying? Thanks in advance to all.
Andrew
boomer_106 
Silver - Posts: 710
Silver spacespace
Joined: November 25, 2003
Location: United States
Posted: October 29, 2004 at 5:01 PM / IP Logged  

Volkswagen

Jetta

1999-2002

Remote Starter  Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Start:

 

RED / BLUE

IGNITION SWITCH HARNESS

Ignition  #1:

 

BLACK

IGNITION SWITCH HARNESS

Ignition #2:

 

BROWN / RED

IGNIITON SWITCH HANRESS

Ignition  #3:

 

N/A

Accessory:

 

BLACK/ RED

IGNITION SWITCH HARNESS

Brake  Light:

 

RED / BLACK

AT SWITCH ABOVE BRAKE PEDAL

Tach  Signal:

 

GREEN/ YELLOW

OR GREEN/ RED IN HARNESS, ENGINE FRONT

Parking Lights:

 

GRAY/TAN

OR GRAY/ORANGE & GRAY/VIOLET *

Headlights:

 

WHITE/ BLACK

AT HEADLIGHT SWITCH

OEM Alarm  Disarm:

 

SEE NOTE BELOW **

OEM Alarm  Arm:

 

Diesel  Glow Plug:

 

Clutch  Bypass Wire:

 

Notes:

 * This vehicle maybe be equipped with a transponder immobilizer system, Must use Universal Alarm Bypass Module part #2x402 where X can be any number.

Volkswagen

Jetta

1999-2002

Alarm and Keyless  Entry Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Constant  +12 Volts:

 

RED

IGNITION SWITCH HARNESS

Starter  Kill:

 

RED / BLUE

IGNITION SWITCH HARNESS

Ignition  +12 Volts:

 

BLACK

IGNITION SWITCH HARNESS

Dome  Lights/Superv:

 

BROWN / WHITE (-)

OR BLUE/GRAY (-) AT ALARM MODULE

OEM Horn:

 

BLACK / YELLOW

AT 3-PIN PLUG BEHIND FUSE PANEL

Power  Lock:

 

YELLOW/BLUE (-)

IN DRIVER'S DOOR OR RED / BLUE IN DR. KICK

Power  Unlock:

 

DK. GREEN/ RED (-)

IN DRIVER'S DOOR OR RED / LT. GREEN ***

Trunk  Release:

 

GRAY

AT SWITCH IN GLOVE BOX

Alarm  Input Wire:

 

BROWN / WHITE (-)

OR BLUE/GRAY (-) AT ALARM MODULE

Notes:

* Split Parking Light System - must use relays to isolate the circuits from each other. ** Alarm Disarms With Single Pulse To The Unlock Wire. *** Two Consecutive Pulses, Unlocks The Door.
dunyamunya 
Member - Posts: 10
Member spacespace
Joined: October 25, 2004
Location: United States
Posted: October 29, 2004 at 5:49 PM / IP Logged  
Thank you very much for help, boomer
Andrew

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer