the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 S10 Extreme VSS Wire


Post ReplyPost New Topic
< Prev Topic Next Topic >
trevor3315 
Member - Posts: 4
Member spacespace
Joined: November 23, 2004
Posted: November 28, 2004 at 1:42 PM / IP Logged  

Where can I locate the VSS wire on this truck??  2004 S10 Extreme 4.3l           I have searched the forum for hours and cant find a answer.. I need this for a pioneer navigation  {AVIC n1}

Any help is greatly appreciated!!!!!!

SoundFX411 
Copper - Posts: 153
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: October 20, 2002
Location: New York, United States
Posted: November 28, 2004 at 6:23 PM / IP Logged  
Look for a LT.BLUE/WHITE wire at the BCM. The BCM is located in the center console below the radio. It's the LT.BLUE plug pin B1
SoundFX
trevor3315 
Member - Posts: 4
Member spacespace
Joined: November 23, 2004
Posted: November 28, 2004 at 11:36 PM / IP Logged  
this truck has no center console,, what is a bcm???
sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: November 29, 2004 at 5:48 PM / IP Logged  
The BCM (Body Control Module) is under the center of the dash behind the under dash black cover panels. The plugs are near the gas pedal. The VSS wire is in cavity B1 of the light blue center plug. The wire is dark GREEN / WHITE.
sparky
trevor3315 
Member - Posts: 4
Member spacespace
Joined: November 23, 2004
Posted: December 03, 2004 at 12:14 AM / IP Logged  
OK I found the right plug!! And Location B1 is a dark GREEN/ white wire.. But, I put a test light on this wire and drove the truck. It did not light up... Shouldnt the wire have a positive charge when the car is in foward motion???                                          PLEaSe  HelP
Allaroundsounds 
Member - Posts: 1
Member spacespace
Joined: November 30, 2004
Location: United States
Posted: December 11, 2004 at 12:11 PM / IP Logged  

Just my 2 cents worth, But Per Pioneer tech, If you are using a newer Nav system such as the Avic 1 the VSS wire is not needed at all. Have Done Numerous installs of this unit IN RV applications were VSS would have been Nightmarish to find and have had No troubles what so ever.

Hope It Helps.

Ken

sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: December 15, 2004 at 4:30 PM / IP Logged  
Take your test light light and throw it away. If you haven't blown the BCM yet, use a digital volt meter. Set it on an A/C voltage scale to get a reading. Trust me. It's the correct wire. Test lights will cause serious and I mean SERIOUS damage to any car's electrical system if the user starts probing wires. Only use a digital VOM.
sparky

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer