the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

alarm system

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / alarm system (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
bddego321 
Member - Posts: 14
Member spacespace
Joined: October 16, 2002
Location: United States
Posted: October 17, 2002 at 6:17 PM / IP Logged  

im putting a remote starter/keyless entry/alarm system in my car made by commando...i got everything working except everytime i connect the power source, the alarm goes off, and no matter what i do, it doesnt turn off, until i disconnect it from the system...what could possibly be causing this?? please help!

anthony

djfearny2 
Silver - Posts: 810
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 23, 2002
Location: United States
Posted: October 17, 2002 at 6:22 PM / IP Logged  
well everytime you connect power it is resetting alarm and yes it will keep doing this have you tried connecting it and then pressing lock or unlock on remote and if so make sure your remote antenna is plugged in some alarms require that or they will not recieve the signal.
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.
bddego321 
Member - Posts: 14
Member spacespace
Joined: October 16, 2002
Location: United States
Posted: October 17, 2002 at 6:28 PM / IP Logged  

i tried pressing lock and unlock, but it  was not stopping it.  The remote is working because the remote start part of the system is working fine.  Is there any other possibilities? thanx alot...

anthony

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 17, 2002 at 6:48 PM / IP Logged  

Did you accidentally have the siren wire hooked up wrong ? Check the siren wire and make sure that you have it hooked up properly.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
bddego321 
Member - Posts: 14
Member spacespace
Joined: October 16, 2002
Location: United States
Posted: October 17, 2002 at 7:01 PM / IP Logged  

i hooked one wire up to ground, and the other to the console.....this is what the instructions said....is there anything else that could be causing this?  thanx alot for your help...i appreciate it alot...

anthony

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 17, 2002 at 8:52 PM / IP Logged  
Just make sure that you have the siren (+) wire hooked up to the siren output wire on the alarm brain. Other possibilities would be that your unit is defective alarm system -- posted image.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
bddego321 
Member - Posts: 14
Member spacespace
Joined: October 16, 2002
Location: United States
Posted: October 17, 2002 at 8:58 PM / IP Logged  
thanx jeff
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 17, 2002 at 9:01 PM / IP Logged  
No problemo... please post yor results if you find anything else.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer