wiring for 1999 olds Aurora

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / wiring for 1999 olds Aurora (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

alik

Member - Posts: 10

Joined: February 01, 2005

Posted: February 01, 2005 at 3:13 PM / IP Logged

Need wiring diagram for '99 Aurora OR any other help ...Had remote start/ alarm installed but suspecting some wires are incorrectly hooked up. The parking lights kept flashing even when car is off and armed, when shock sensor activated and alarm goes of the doors unlock for some reason.

Had the headlight (control) module changed, after it seemed to cause problems, the flashing stopped but i'm suspecting more wiring problems.

Back to Top

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 03, 2005 at 10:34 PM / IP Logged

Oldsmobile

Aurora

1996-1999

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	YELLOW	IGNITION SWITCH HARNESS **
Ignition #1:	PINK	IGNITION SWITCH HARNESS
Ignition #2:	PURPLE / WHITE	IGNITION SWITCH HARNESS
Ignition #3:	WHITE	IGNITION SWITCH HARNESS
Accessory:	ORAN	IGNITION SWITCH HARNESS
Brake Light:	WHITE (+)	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:	WHITE	AT IGNITION CONTROL MODULE *
Parking Lights:	BROWN (+)	AT LAMP CONTROL MODULE
Headlights:	WHITE (-)	AT HEADLIGHT SWITCH
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* Ignition Control Module Located On Passenger Front Of Engine (3.8L), Or On Top Rear Of Engine (V-8). ** This Vehicle Is Equipped With GM's VATS Anti-Theft System ; See Note #237.

Oldsmobile

Aurora

1996-1999

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	RED (2)	IGNITION SWITCH HARNESS
OEM Alarm Disarm:	L GREEN (-)	DRIVER'S KICK PANEL
Dome Lights/Superv:	WHITE (-)	AT COURTESY LIGHT ***
OEM Horn:	BLACK (-)	STEERING COLUMN HARNESS
Power Lock:	RED / BLACK	DRIVER'S KICK PANEL ****
Power Unlock:	ORANGE / BLACK	DRIVER'S KICK PANEL ****
Trunk Release:	BLACK (+)	AT TRUNK RELEASE SWITCH
Alarm Input Wire:	WHITE (-)	AT COURTESY LIGHT ***
Notes:	** WHITE (-) Wire Also Located At Multi Function Alarm, Lock & Lighting (MALL) Module In Driver Kick Panel. Optional Door Trigger BLACK (-) (Front Doors) & D BLUE (-) (Rear Doors) At MALL Module. Diode Isolation Needed, Cathode (Band) Side Of Diode Faces OEM Wires. ** See Note #202 - Positive Door Lock Diagram.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring for 1999 olds Aurora

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.