2006 Hyunda Santa Fe Wiring

Hey everyone, doing a new alarm for the wife's car... I've got a wiring diagram for this, but it's very basic and doesn't include anything that I didn't already know. If anyone has colors/locations for windows, sunroof and even the HU (any additional would be great too!) I would be eternally grateful! I did do a search already but the only Santa Fe's listed don't match my colors. Thanks a million!

dont see 2006 only 2005 DIRECTWIRE™ WIRING INFORMATION - HYUNDAI / SANTA FE / 2005 / Remote Start 12volts red and orange (common 50A)   +   ignition harness Starter blue   +   ignition harness Second Starter N/A        Ignition blue   +   ignition harness Second Ignition N/A        Third Ignition N/A        Accessory pink   +   ignition harness Second Accessory green   +   ignition harness Keysense brown   +   ignition harness Power Lock yellow   -   driver kick, white 22 pin plug Power Unlock WHITE/ black to white   -   driver kick, white 22 pin plug Lock Motor gray to orange   5wi driver kick, white 22 pin plug Unlock Motor white to gray   5wi driver kick, white 22 pin plug Parking Lights+ GREEN/ orange   +   fuse box, 15 pin plug Parking Lights- white   -   headlight switch Hazards green (only w/fac. alarm)   -   ETACS, 12 pin plug Notes: The ETACS module is attached to the back of the fuse box on the bottom. Turn Signal(L) pink   +   turn signal switch Turn Signal(R) gray   +   turn signal switch Reverse Light blue/black   +   fuse box, top right plug Door Trigger yellow   -   fuse box, 8 pin plug Dome Supervision use door trigger wire        Trunk/Hatch Pin BLACK/ orange   -   fuse box, 15 pin plug Hood Pin pink   -   ETACS, 12 pin plug Notes: The ETACS module is attached to the back of the fuse box on the bottom. The hood pin is also green at the switch under the hood. Trunk/Hatch Release N/A        Power Sliding Door N/A        Factory Alarm Arm factory remote only        Factory Alarm Disarm factory remote only        Disarm No Unlock disarms with remote start        Tachometer WHITE/ black, blue, or pink   ac   ECM Notes: The ECM (Engine Control Module) is under the center console to the right of the gas pedal. On the 2.4L with A/T it is in the 26 pin plug, the 2.4L with M/T it is in the 12 pin plug, the 2.7L it is in the 40 pin plug, and the 3.5L it is in the 26 pin plug. Wait to start N/A        Brake Wire GREEN/ black   +   brake pedal switch Parking Brake green   -   parking brake switch Horn Trigger brown   -   horn switch Memory Seat 1 N/A        Memory Seat 2 N/A        Memory Seat 3 N/A        Interface Module: Category: Immobilizer Bypass Required: Yes Type: Transponder Part #: 556UW Alternate Part1 #: DesignTech 20402 Alternate Part2 #: DesignTech 29402 Notes: Only Canadian models have the immobilizer system.