DEI 555P in a 2000 Explorer v8

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / DEI 555P in a 2000 Explorer v8 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rich3398

Member - Posts: 2

Joined: June 25, 2006

Location: United States

Posted: June 25, 2006 at 10:43 AM / IP Logged

I have a 2000 Explorer V8 Eddie Bauer. I'm tryinf to install the DEI 555P to bypass the pats system. Does anyone know where i can find the PATS module or where i can find the PATS data and sync wires to tap into. The instrunctions say to tap into imoobilizer pin 3 and pin 4 and also the ignition wires.

Any help would be great thanks.

Rick

Back to Top

rich3398

Member - Posts: 2

Joined: June 25, 2006

Location: United States

Posted: June 25, 2006 at 2:33 PM / IP Logged

nevermind i was able to find the correct wires. look for a black box attached to the key cylinder with a black tube coming off of it. that is where you will find the wires.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI 555P in a 2000 Explorer v8

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.