remote start wiring for 2007 sonata

I need a complete wiring diagram for a 2007 Hyundai Sonata for a remote start installation. Also if anyone has any information on disabling or at least making quieter the seat belt alarm for this car I would appreciate it. It goes off every time you start the car and it's suprisingly loud. The dealer has told us that there is nothing he can do but he has gotten other complaints of the same thing. The 2006 model had the same feature but it was not as loud.

i have for a 2006...is it the same as 07?  none-the-less here it is:

12volts	pink (40A), red (30A)	+	ignition harness
Starter	green	+	ignition harness
Second Starter	N/A
Ignition	blue	+	ignition harness
Second Ignition	N/A
Third Ignition	N/A
Accessory	orange	+	ignition harness
Second Accessory	green	+	ignition harness
Keysense	white	+	ign harn or BCM, wht 24P plug, pin 4
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls.
Power Lock	pink/black	-	DKP or BCM, wht 20 pin plug, pin 3
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls.
Power Unlock	yellow/black	-	DKP or BCM, wht 20 pin plug, pin 11
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls.
Lock Motor	gray	5wi	driver kick, door harness
Unlock Motor	red to white	5wi	driver kick, door harness
Parking Lights+	BROWN / blk (L), GREEN/ blk (R)	+	driver kick, harness to rear
Parking Lights-	pink	-	sw. or BCM, wht 20 pin plug, pin 4
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls.
Hazards	brown	-	BCM, gray 24 pin plug, pin 9
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls.
Turn Signal(L)	gray	+	turn signal switch
Turn Signal(R)	green	+	turn signal switch
Reverse Light	blue	+	driver kick, harness to rear
Door Trigger	pink	-	BCM, wht 24 pin plug, pin 22
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls.
Dome Supervision	yellow/black to yellow	-	BCM, gray 24 pin plug, pin 1
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls.
Trunk/Hatch Pin	GREEN/ black	-	DKP or BCM, wht 24 pin plug, pin 23
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls.
Hood Pin	green	-	pin sw. or BCM, wht 24P plug, pin 24
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls.
Trunk/Hatch Release	white	-	DKP or BCM, wht 20 pin plug, pin 13
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls. The trunk release motor wire is red (+) in the driver kick, harness to the rear. The fuel lid release is GREEN/ black (+) in the driver kick, harness to the rear.
Power Sliding Door	N/A
Factory Alarm Arm	yellow	-	DKP or BCM, wht 20 pin plug, pin 1
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls. Meter this wire while turning the key in the driver door key cylinder.
Factory Alarm Disarm	orange	-	DKP or BCM, wht 20 pin plug, pin 2
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls. Meter this wire while turning the key in the driver door key cylinder.
Disarm No Unlock	see factory alarm disarm
Tachometer	white or WHITE/ black	ac	instrument cluster or PCM
Notes: The PCM (Powertrain Control Module) is near the driver side shock tower under the hood. The tach wire is in pin 86 on the 2.4L, and in connector 1, pin 61 on the 3.3L. For tach, can also go to any fuel injector and use the wire that is not black or orange.
Wait to start	N/A
Brake Wire	green	+	brake pedal switch
Parking Brake	orange	-	parking brake switch
Horn Trigger	white or yellow/orange	-	sw. or BCM, gray 24 pin plug, pin 8
Notes: The BCM (Body Control Module) is under the center console, below the A/C controls.
Memory Seat 1	N/A
Memory Seat 2	N/A
Memory Seat 3	N/A

Interface Module:

Category: Immobilizer Bypass

Required: Yes

Type: Transponder

"If a man made it, another can modify it...it just takes some thinking."

"If you ask questions, you're a fool for 5 minutes; if you don't, you're a fool for a lifetime."

if the seatbelt alarm stops as soon as you clip the seatbelt in, then just take the two wires from under the seat and to the seatbelt base and connect them together and the car will think the seatbelt in clicked in place all the time"If a man made it, another can modify it...it just takes some thinking."

"If you ask questions, you're a fool for 5 minutes; if you don't, you're a fool for a lifetime."