the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

lookin for a pic, 99 neon lock, unlock


Post ReplyPost New Topic
< Prev Topic Next Topic >
teddy233 
Member - Posts: 3
Member spacespace
Joined: January 19, 2007
Location: Canada
Posted: February 07, 2007 at 4:31 PM / IP Logged  
Hi all you nice people :) (hows that for sucking up) can someone send a pic of the connector i'm looking for, (dodge neon 1999) for the lock n uplock ... site tells me a blue 16 pin on drivers side but i don't have any blue 16 pin connectors that i can see...
cutter1122 
Copper - Posts: 103
Copper spacespace
Joined: January 16, 2005
Location: Canada
Posted: February 07, 2007 at 11:43 PM / IP Logged  

lookin for a pic, 99 neon lock, unlock -- posted image.

lock   ORANGE / violet

unlock   pink/violet

check the wire come from the driver door boot

teddy233 
Member - Posts: 3
Member spacespace
Joined: January 19, 2007
Location: Canada
Posted: February 10, 2007 at 2:35 PM / IP Logged  
Hey,
thanks for the diagram... so i connected my wires to the correct ones... but the remote won't lock or unlock the doors...
A friend told me that when a pro installed his unit they needed a relay for the door locks or something like that... is there a way i can test this; like putting some juice to the wires to see what happens :)(pictures smoke)
thanks,
teddy233 
Member - Posts: 3
Member spacespace
Joined: January 19, 2007
Location: Canada
Posted: February 15, 2007 at 6:45 PM / IP Logged  
I just want to say that i figured it out... Took me a little while and some reading to realize that the relays in the pic don't come with the car. So i went out and found that you can buy a kit $20 with the 2 relays and harness... My next question is... how do i know what wire to put on what side of the cut...???   I mean if it doesn't work the first time I Just switch them but i'm getting short on fuses hahahalookin for a pic, 99 neon lock, unlock -- posted image.
Other then that... this question is solved! :) Thanks
swerve 
Copper - Posts: 149
Copper spacespace
Joined: January 10, 2007
Location: Oregon, United States
Posted: February 16, 2007 at 5:32 PM / IP Logged  

the 30's should go to the motor side of your wiring, the 87a's to the switch side, 86 and 87 get 12v and 85 goes to your lock and unlock from the alarm.

git yer swerve on!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer