car alarm

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / car alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

fame

Member - Posts: 1

Joined: February 08, 2003

Location: United States

Posted: February 08, 2003 at 6:31 PM / IP Logged

2002 dodge dakota,installing EVS II to factory installed keyless entry,

Q. after installation do I have to reprogrammed system, for driver's door unlock enable? with a DRB III scan tool? and where can I purchased one?

thanks,

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: February 08, 2003 at 9:33 PM / IP Logged

you cant get a drb3 it is a crysler computer and cost about $5000 you can turn it on thru the car just check your manual. i believe it is key on/off 5x the unlock switch 1 x

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

car alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.