the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

apline cva 1005 no video

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / apline cva 1005 no video (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
dirifto240 
Member - Posts: 4
Member spacespace
Joined: July 10, 2008
Location: California, United States
Posted: July 10, 2008 at 3:16 AM / IP Logged  

I recently installed my cva 1005, but when I tried to hook up an xbox to the inputs on the brain the screen read "picture off for your safety". Now Im in park and the ebrake is up and Ive tried doing the foot brake ebrake thing but still shows nothing.  Im getting the sound, but no picture.  Did I hook something up wrong?  I did notice on the wiring diagram that it said the yellow blue wire is the park brake wire. What do I hook that up too and is that my problem.

Sorry this is so long Its just starting to bug me.

Thanks, JP

i am an idiot 
Platinum - Posts: 13,670
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: July 10, 2008 at 5:08 AM / IP Logged  
The yellow/black wire has to be connected to the positive output of your brake pedal switch.
The yellow/blue wire needs to be connected to your emergency brake switch.
After both of those wires are connected properly, there is a sequence that needs to be followed to get your screen to show video.
The sequence is as follows: Press and hold down your brake pedal. Briefly apply the parking brake, release it then reapply and leave on. Now release the brake pedal.
dirifto240 
Member - Posts: 4
Member spacespace
Joined: July 10, 2008
Location: California, United States
Posted: July 10, 2008 at 2:47 PM / IP Logged  
Thanks!  So couple more Q's.  What is the yellow/black wire?  Also the foot brake wire is the three wires that connect from the deck to the brain right?  Also do I just run a long wire from the yellow blue all the way to the ebrake? And the do I just tap into that wire?
i am an idiot 
Platinum - Posts: 13,670
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: July 10, 2008 at 9:50 PM / IP Logged  
The yellow/black wire connects to the positive output of the switch mounted on the brake pedal of your vehicle. The footbrake wire is not the 3 wires that connect the deck to the brain. yes you need to run the yel/blue wire to the switch at the pivot point of your emergency brake. Yes you need to tap into that wire.
benzo33 
Copper - Posts: 87
Copper spacespace
Joined: June 23, 2008
Location: California, United States
Posted: July 10, 2008 at 11:55 PM / IP Logged  
Exactly, I have a IVA C801 which is similar to your head unit. I used the wiring diagram from the Haynes manual to hook the dvd player and playstation 2. I like it because you can also hook up a nav system. Btw, did yours come with a black cover?
2001 Corolla S and 2005 Neon SRT 4 ACR.
dirifto240 
Member - Posts: 4
Member spacespace
Joined: July 10, 2008
Location: California, United States
Posted: July 12, 2008 at 1:43 AM / IP Logged  
No mine didnt come with a black cover.  So the yellow black wire comes out of the brain itself then in the remote harness next to the main wire harness? If so then Im missing that harness.  I looked at the brain and it showed a remote harness that had 2 BROWN / white wires and a uyellow/black foot brake wire. If this is so then does anyone know where I would be able to find that harness?
benzo33 
Copper - Posts: 87
Copper spacespace
Joined: June 23, 2008
Location: California, United States
Posted: July 12, 2008 at 2:08 AM / IP Logged  
The two brown and white are the remote control output leads. I have not used those two. Correct, there should be another harness that plugs next to the remote output terminal, which is the power supply connector. There should be a bundle of 11 wires, which include the remote turn-on, battery, ignition, and the parking brake lead(yellow and blue). If you don't have that, you could get one from ebay.
2001 Corolla S and 2005 Neon SRT 4 ACR.
i am an idiot 
Platinum - Posts: 13,670
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: July 12, 2008 at 3:38 AM / IP Logged  
01T35047Y02 is the part number, it is available from Pacific Coast Parts 9.00 plus shipping   pacparts.com   1-800-421-5080
Picture
dirifto240 
Member - Posts: 4
Member spacespace
Joined: July 10, 2008
Location: California, United States
Posted: July 14, 2008 at 1:41 AM / IP Logged  
Thanks guys I am going to be picking my harness up this weekend.  Ill let you know how it goes

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 7, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer