the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

amp cut off


Post ReplyPost New Topic
< Prev Topic Next Topic >
yestermainz 
Member - Posts: 1
Member spacespace
Joined: October 13, 2010
Location: Florida, United States
Posted: October 13, 2010 at 1:57 PM / IP Logged  
I am wondering if I can unplug all clips from amp in 1992 Lincoln Town Car. This will enable me to use existing speaker wires without using amp. There are two clusters, one showing all speaker wires and power lines, and one that is in a grey cord. Which ones can I use to keep my Kenwood head unit play directly from it not amp . Amp seems too rob power and punch from my 1200 watt bass amp. Before this set up I hade a 22x4 watt receiver direct wired to power my amp and subs. I had to keep everything at half gain on all my knobs. Now I have a Kenwood 50 x4 unit and same sub amp, with brandnew Kicker 10inch woofer, and all my nobs are at full open gain and it isn't even close to the sound bump that I was getting with mickeymouse set up.
Yes
i am an idiot 
Platinum - Posts: 13,670
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: October 14, 2010 at 7:48 PM / IP Logged  

Your 50x4 Kenwood deck puts out no more power than the one you removed. 

Look into a Metra 70-5514 ford amp bypass harness. 


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer