axxess aswc and pyle pldnv78i on 2011 nt

Guys, I am having trouble programming the Axxess ASWC-1 with Pyle PLDNV78I on a 2011 nissan titan. I have hooked up the adapter and it programs my steering wheels but not correctly. The automatic detection doesnt work properly. i tried 1-11 manual programming for the radio all for different things to work and not one to work with any of the correct button settings. It does program correct though. I have bypassed the Bluetooth and hooked up the programmer. Depending on what stereo manual program i choose i get like volume down which will be skip song.. the bt phone mode = power off and then the bottom switch holding down will change stations. I tried to program these differently and no matter what i do it seems like they are getting same button response.. I did contact axxess over the weekend. They stated they never tested with PYLE so they didnt really know what was up. They suggested hooking the Pyle stereo directly to my 2011 nissan titan. So the question i asked pyle (which never responded) is what cables on the nissan would i hook the stereo to. On the stereo there is awsc settings, so the stereo supports it. It has 3 cables. SwKey 1 and SwKey 2 with SWKEY ground. I know which one the ground goes to on the nissan. Pin3 as the same with Axxess.. but what would the other cables go to anyone know? Please help. I would like to get my steering wheel controls working....

I used the axxess guide to figure out what wires are swkey1 and key 2 for nissan but when i hook the pyle directly to it i either get the keys up or keys down.. depending on how i have the wires.. Anyone have experience in making axxess work with nissan 2011 titan and Pyle ? or making pyle stereo work directly with steering wheel controls? Can anyone please help me?