Rear View Camera, Shorten Feed Wire?

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Rear View Camera, Shorten Feed Wire?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

52-chebby

Member - Posts: 14

Joined: March 05, 2020

Location: New Brunswick, Canada

Posted: June 20, 2023 at 3:43 PM / IP Logged

Is it possible to shorten (cut) and splice the feed wire to the camera on the back of my truck? I actually need to cut to pass wire through small hole but will shorten it at the same time.

Thanks

Back to Top

audiokid1

Copper - Posts: 142

Joined: March 17, 2003

Location: United States

Posted: June 23, 2023 at 10:27 PM / IP Logged

Should not be a problem. Video, Shield/Drain, and Power are usually all separate....they can be shortened or extended.

Back to Top

52-chebby

Member - Posts: 14

Joined: March 05, 2020

Location: New Brunswick, Canada

Posted: June 24, 2023 at 8:13 AM / IP Logged

Thank you for that, I sort of thought so but wanted to be sure.

Back to Top

audiokid1

Copper - Posts: 142

Joined: March 17, 2003

Location: United States

Posted: June 24, 2023 at 10:51 AM / IP Logged

What type of truck is it? YMM?

Back to Top

52-chebby

Member - Posts: 14

Joined: March 05, 2020

Location: New Brunswick, Canada

Posted: June 24, 2023 at 12:46 PM / IP Logged

It's a 1952 Chevy pickup... Have a look at my electrical panel... Remember, this truck only had 5 fuses when new... Rear View Camera, Shorten Feed Wire? -- posted image.

Rear View Camera, Shorten Feed Wire? -- posted image.

Thanks for asking...

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.