Mobile TV M5000 cable pinout

    A friend of mine gave me a Mobile TV M5000 5 inch monitor , but no cable. He sold the car in which it was installed and when he took out the monitor he left the cable ( I know he's an idiot ). Any way I have a plug that fits the plug on the unit that I can use to make a new cable . But I need to know the pins layout in order to make the new cable(don't want to guest and fry the monitor). Does anyone have this info?

I am looking for this same info. however i have figured some of the pins, and can get power and video. I am still looking for audio pins though. Here is what I have : with the plug turned so that the two pins alone are up top

left t0 right, top to bottom : #1-video in ground (outer of rca) #2-video in pos. (center of rca) 

         1 2                        #9-system power; 12v   #10-system ground

      3 4 5 6                    10 is the metal edged ring around the outside of the plug--system ground

      7    8 9                     Iam still tracing #'s 3 - 8 they will be 2nd video and audio in/out

I hope this helps if you still need this info.