AVIC-N1 in Sequoia

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / AVIC-N1 in Sequoia (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

camzcom

Member - Posts: 6

Joined: November 28, 2004

Location: United States

Posted: November 28, 2004 at 8:56 PM / IP Logged

Installing a AVIC-N1 in a 2005 Toyota Sequoia. Need to know where the speed sensor wire is and if the reverse light wire can be found in the cab somewhere. Any help? Thanks

zube

Member - Posts: 18

Joined: October 18, 2004

Location: United States

Posted: November 30, 2004 at 4:03 PM / IP Logged

reverse is RED / black in driver kick panel

vss GREEN/ orange behind glove box 35 pin connector pin 17

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

AVIC-N1 in Sequoia

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.